Cookies disclaimer

Read and accept our informative about cookies.

Features

NameDetail
Dispensing advantages
  • Closed wn idle (NC)
  • Designed for rough industrial work places
  • Easy handling and maintenance
Typical dispensed products

Oil, grease, glue, silicon, paint, flux, medical products, and many other chemicals. (Filled products included)

Main industries

Electronic, solar, automobile, packaging, furniture, medical, cosmetic, food, special machines

Viscosity range

50 - 200,000 mPas (thixotrop)

Dispensing accuracy

99 % (dispensing tolerance < 1 %)

Dispensing frequency

up to 150 Hz

Resistant to

acids, alkalis, solvents

Working material

filtered compressed air, oil-free, filter unit 40µm

Switching time

< 1 ms

Electrical input

24 V, PLC compatible

Service life

> 100 Mio. cycles

Weight

270 g

Ambient temperature

-5 to +40 °C

Description

LDPDOTCT

Pneumatically actuated high performance valve for a contactless dispensing of highly viscous materials

The micro dispensing valve P-Dot CT is designed for a contactless dispensing of adhesives, silicones, coatings, greases and oils. With extremely short triggering intervals (< 1ms) it is possible to accurately apply the smallest amounts of highly viscous materials over distances from 2mm to 40mm. The volume of a single shot can be set to 3 to 200 nl. Thus, depending on the material, dot sizes from a minimum of 350 µm to a maximum of 2000 µm can be reached. The separation of the fluidic part from the actuator part as well as a longer tappet ensures protection of the valve system and a considerably safe operation.

Dispensing Advantages
  • Dispensing volumes: 3 to 200 nl
  • Material pressure: 0.2 to 6 bar (up to 100 bar)
  • Working pressure: 2 to 5 bar
  • Actuator: electro-pneumatic

VARIANTS

Micro Dispensing Valve P-Dot CT HM (hot melt)

Pneumatically actuated high performance valve for a contactless dispensing of hotmelt adhesives

The micro dispensing valve P-Dot CT HM is designed for the contactless dispensing of highly viscous hotmelt and other highly viscous, high temperature materials. Extremely short triggering intervals (< 1ms) it is possible to accurately apply the smallest amounts of such materials over distances from 2mm to 40mm. The volume of a single shot can be set to 10 to 200 nl. Thus, depending on the material, dot sizes from a minimum of 350 µm to a maximum of 2000 µm can be reached. The separation of the fluidic part from the actuator part as well as a longer tappet ensures protection of the valve system and a considerably safe operation.

Dispensing Advantages
  • Dispensing volumes: 10 to 200 nl
  • Material working temperature: 180°C max.
  • Material pressure: up to 100 bar
  • Working pressure: 2 to 8 bar

Contact us, for more details and specification on this product